6 x 36 Warrington Seale with Fiber Core		6 x 36 Warrington Seale with IWRC

FIBER CORE (IPS)
DIAMETER IN INCHES	BREAKING STRENGTH IN TONS*	APPROX. WEIGHT PER FOOT IN POUNDS
1/4	2.74	.105
5/16	4.26	.164
3/8	6.10	.236
7/16	8.27	.32
1/2	10.7	.42
9/16	13.5	.53
5/8	16.7	.66
3/4	23.8	.95
7/8	32.2	1.29
1	41.8	1.68
1 1/8	52.6	2.13
1 1/4	64.6	2.63
1 3/8	77.7	3.18
1 1/2	92.0	3.78

IWRC
DIAMETER IN INCHES	BREAKING STRENGTH IN TONS* (IPS)	BREAKING STRENGTH IN TONS* (EIPS)	APPROX. WEIGHT PER FOOT IN INCHES
1/4	2.67	3.4	.116
5/16	4.16	5.27	.18
3/8	5.95	7.55	.26
7/16	8.07	10.2	.35
1/2	10.4	13.3	.46
9/16	13.2	16.8	.59
5/8	16.2	20.6	.72
3/4	23.2	29.4	1.04
7/8	31.4	39.8	1.42
1	40.7	51.7	1.85
1 1/8	51.3	65.0	2.34
1 1/4	63.0	79.9	2.89
1 3/8	75.7	96.0	3.50
1 1/2	89.7	114.0	4.16
1 5/8	104.0	132.0	4.88
1 3/4	121.0	153.0	5.67
2	156.0	198.0	7.39
2 1/4	195.0	247.0	9.36
2 3/8	217.0	274.0	10.4
2 1/2	238.0	302.0	11.6
2 3/4	285.0	361.0	14.0
3	336.0	425.0	16.6

 

• *Listed for comparison only. Actual operating loads may vary, but should never exceed the recomended design factor or 20 of listed Breaking Strength.
• Made in accordance with federal specification RR-W-410E. Meets the performance requirements of API-9A, and proposed A.S.T.M. 
• For more information, please click on the warnings & specifications link above.
• Performed, right regular lay, lubricated.
• Note: Lang lay, alternate lay, seale available in some sizes. heavy lubrication on request.
  WARNING: Read important warnings and safety information.

View this Hardware Now at Elite Sales

 

6 x 25 Filler Wire with Fiber Core		6 x 19 Seale with IWRC		6 x 25 Filler Wire with IWRC		6 x 26 Warrington Seale with IWRC

FIBER CORE
DIAMETER IN INCHES	BREAKING STRENGTH IN TONS* (IPS)	BREAKING STRENGTH IN TONS*(EIPS)	APPROX. WEIGHT PER FOOT IN POUNDS
1/4	2.74	3.01	.105
5/16	4.26	4.69	.164
3/8	6.10	6.71	.236
7/16	8.27	9.1	.32
1/2	10.7	11.8	.42
9/16	13.5	14.9	.53
5/8	16.7	18.4	.66
3/4	23.8	26.2	.95
7/8	32.2	35.4	1.29
1	41.8	46.0	1.68
1 1/8	52.6	57.9	2.13
1 1/4	64.6	71.1	2.63
1 3/8	77.7	85.5	3.18
1 1/2	92.0	101.2	3.78

IWRC
DIAMETER IN INCHES	BREAKING STRENGTH IN TONS* (IPS)	BREAKING STRENGTH IN TONS* (EIPS)	APPROX. WEIGHT PER FOOT IN POUNDS
1/4	2.94	3.4	.116
5/16	4.58	5.27	.18
3/8	6.56	7.55	.26
7/16	8.89	10.2	.35
1/2	11.5	13.3	.46
9/16	14.5	16.8	.59
5/8	17.7	20.6	.72
3/4	25.6	29.4	1.04
7/8	34.6	39.8	1.42
1	44.9	51.7	1.85
1 1/8	56.5	65.0	2.34
1 1/4	69.4	79.9	2.89
1 3/8	83.5	96.0	3.50
1 1/2	98.9	114.0	4.16
1 5/8	115.0	132.0	4.88
1 3/4	133.0	153.0	5.67
2	172.0	198.0	7.39
2 1/4	215.0	247.0	9.36
2 3/8	239.0	274.0	10.4
2 1/2	262.0	302.0	11.6
2 3/4	314.0	361.0	14.0
3	374.0	425.0	16.6

 

• * Listed for comparison only. Actual operating loads may vary, but should never exceed the recommended design factor or 20 of listed Breaking Strength.
• Made in accordance with federal specification RR-W-410E. Meets the performance requirements of API-9A, and proposed A.S.T.M. 
• Performed, right regular lay, lubricated.
• Note: Lang lay, alternate lay, seale available in some sizes. heavy lubrication on request.
• WARNING: Read important warnings and safety information.

View this Hardware Now at Elite Sales

 

6 x 25 Filler Wire with Fiber Core		6 x 19 Seale with IWRC		6 x 25 Filler Wire with IWRC		6 x 26 Warrington Seale with IWRC

FIBER CORE
DIAMETER IN INCHES	BREAKING STRENGTH IN TONS* (IPS)	BREAKING STRENGTH IN TONS*(EIPS)	APPROX. WEIGHT PER FOOT IN POUNDS
1/4	2.74	3.01	.105
5/16	4.26	4.69	.164
3/8	6.10	6.71	.236
7/16	8.27	9.1	.32
1/2	10.7	11.8	.42
9/16	13.5	14.9	.53
5/8	16.7	18.4	.66
3/4	23.8	26.2	.95
7/8	32.2	35.4	1.29
1	41.8	46.0	1.68
1 1/8	52.6	57.9	2.13
1 1/4	64.6	71.1	2.63
1 3/8	77.7	85.5	3.18
1 1/2	92.0	101.2	3.78

IWRC
DIAMETER IN INCHES	BREAKING STRENGTH IN TONS* (IPS)	BREAKING STRENGTH IN TONS* (EIPS)	APPROX. WEIGHT PER FOOT IN POUNDS
1/4	2.94	3.4	.116
5/16	4.58	5.27	.18
3/8	6.56	7.55	.26
7/16	8.89	10.2	.35
1/2	11.5	13.3	.46
9/16	14.5	16.8	.59
5/8	17.7	20.6	.72
3/4	25.6	29.4	1.04
7/8	34.6	39.8	1.42
1	44.9	51.7	1.85
1 1/8	56.5	65.0	2.34
1 1/4	69.4	79.9	2.89
1 3/8	83.5	96.0	3.50
1 1/2	98.9	114.0	4.16
1 5/8	115.0	132.0	4.88
1 3/4	133.0	153.0	5.67
2	172.0	198.0	7.39
2 1/4	215.0	247.0	9.36
2 3/8	239.0	274.0	10.4
2 1/2	262.0	302.0	11.6
2 3/4	314.0	361.0	14.0
3	374.0	425.0	16.6

 

• * Listed for comparison only. Actual operating loads may vary, but should never exceed the recommended design factor or 20 of listed Breaking Strength.
• Made in accordance with federal specification RR-W-410E. Meets the performance requirements of API-9A, and proposed A.S.T.M. 
• Performed, right regular lay, lubricated.
• Note: Lang lay, alternate lay, seale available in some sizes. heavy lubrication on request.
• WARNING: Read important warnings and safety information.

View this Hardware Now at Elite Sales

Drop Forged Wire Rope Clips

DROP FORGED WIRE ROPE CLIPS – Forged steel, hot galvanized
SIZE IN INCHES	MIN. CLIPS  REQD.	TORQUE IN LBS. FT.*	APPROX. WEIGHT IN POUNDS	DIMENSIONS
				A	B	C	D	E	F	G
1/8	2	4.5	.05	.19	.75	.44	.44	.38	.81	.94
3/16	2	7.5	.10	.25	.94	.56	.56	.50	.94	1.19
1/4	2	15	.18	.31	1.06	.56	.75	.63	1.19	1.50
5/16	2	30	.31	.38	1.44	.75	.88	.75	1.31	1.69
3/8	2	45	.46	.44	1.50	.75	1.00	.88	1.56	1.94
7/16	3	65	.73	.50	1.88	1.00	1.19	1.00	1.81	2.31
1/2	3	65	.73	.50	1.88	1.00	1.19	1.06	1.81	2.31
9/16	3	95	1.00	.56	2.38	1.25	1.31	1.13	2.06	2.50
5/8	3	95	1.00	.56	2.38	1.25	1.31	1.25	2.06	2.50
3/4	4	130	1.50	.63	2.75	1.38	1.50	1.38	2.31	2.75
7/8	4	225	2.7	.75	3.19	1.44	1.81	1.69	2.63	3.31
1	5	225	2.7	.75	3.63	1.75	1.88	1.75	2.63	3.47
1 1/8	6	225	3.1	.75	4.00	2.00	2.00	1.88	2.81	3.56
1 1/4	7	360	4.6	.88	4.38	2.25	2.31	2.06	3.25	4.06
1 3/8	7	360	5.2	.88	4.63	2.31	2.38	2.25	3.44	4.25
1 1/2	8	360	5.9	.88	4.94	2.38	2.63	2.50	3.50	4.38
1 3/4	8	590	9.8	1.13	5.88	2.75	3.06	2.88	3.75	5.25
2	8	750	13.75	1.25	6.50	3.00	3.31	3.38	4.44	5.81
2 1/4	8	750	15.7	1.25	7.13	3.31	3.88	3.81	4.50	6.31
2 1/2	9	750	17.9	1.25	7.75	3.38	4.13	4.25	4.50	6.44

Blue U-Bolts (Korea)
When using U-bolt clips, extreme care must be exercised to make certain that they are attached correctly. The correct way to attach U-bolts is shown above; the "U" section is in contact with the ropes\’s "dead end" and is clear of the thimble. The "live end", carrying the load, is gripped by the saddle of the clip. Also, the tightening and retightening of the nuts must be accomplished as required.

 * Based on clean, unlubricated threads.
Hot galvanized, according to Federal Specification FF-C-450D, Type 1, Class 1. Does not include 1/8" and 3/16".
Table above shows minimum torque required to reach maximum holding power.
Caution: Never use any wire rope clip to directly connect two straight lengths of wire rope.
WARNING: Read important warnings and safety information.

View this Hardware Now at Elite Sales

WARNING: Read important warnings and safety information

View this Hardware Now at Elite Sales

WARNING: Read important warnings and safety information

View this Hardware Now at Elite Sales

*Working Load Limit limit applies to straight line pull only.
When applying load at an angle the Working Load Limit is drastically reduced.
CAUTION: NEVER EXCEED THE WORKING LOAD LIMIT.
Never insert the point of a hook in an eyebolt. Always use a shackle.
WARNING: Read important warnings and safety information.

View this Hardware Now at Elite Sales